WIC-2T NETWORKING EXPANSION MODULE 2 PORT CISCO

Office Hours Mon-Fri 9:30 AM- 7:00 PM EST
750 Shames Dr. Westbury, NY 11590
800-778-7759 516-334-7700 Fax 516-334-7727
Gov, Edu and Approved Businesses Fax PO to 516 334-7727

0 item(s) in cart

SEARCH

Search By System


	Category

ACCESSORIES CABLES CONTROLLERS ENCLOSURES EXTERNAL STORAGE FLASH DRIVE HARD DRIVES HARD DRIVES W-TRAY MAGNETO-OPTICAL MEMORY MOTHERBOARD MULTIMEDIA NETWORKING POWER SUPPLY PROCESSORS RDX DRIVE SERVERS SSD SSD W-TRAY TAPE DRIVES TAPE MEDIA HOT SWAP CADDY/TRAY

HOME > NETWORKING > EXPANSION MODULE > 2 PORT > CISCO > WIC-2T

- Item Image -
** Image may not exactly match product **

WIC-2T - CISCO - (WIC-2T) 2600 2PORT SERIAL WAN INTERFACE CARD. IN STOCK.

Original Item

Select

Quantity

Cost

WIC-2T

$45.00

Add 1 Yr. Warranty $10.00


	DESCRIPTION THE SINGLE AND DUAL PORT SERIAL WAN INTERFACE CARDS PROVIDE SERIAL CONNECTIONS TO REMOTE SITES OR LEGACY SERIAL NETWORK DEVICES SUCH AS SDLC CONCENTRATORS, ALARM SYSTEMS, POS DEVICES, ETC. THE DUAL SERIAL PORT WIC-2T PROVIDES HIGHER LEVELS OF SERIAL PORT DENSITY FOR A SINGLE WAN INTERFACE CARD AND ARE SUPPORTED ON THE CISCO 2600 AND 1720 SERIES. THE WIC-2T SUPPORTS SPEEDS OF UP TO A MAXIMUM PORT SPEED OF 2.048MBPS. EACH PORT CAN BE CONFIGURED INDEPENDANT OF THE OTHER ALLOWING SUPPORT FOR DIFFERENT PHYSICAL INTERFACES (PROTOCOL AND DTE/DCE). BOTH CARDS SUPPORT MIXED ASYNCHRONOUS AND SYNCHRONOUS OPERATION ON A SINGLE CARD AS WELL. THESE DUAL-SERIAL PORT WAN INTERFACE CARDS FEATURE CISCOS NEW, COMPACT, SMART SERIAL CONNECTORS TO SUPPORT A WIDE VARIETY OF ELECTRICAL INTERFACES WHEN USED WITH THE APPROPRIATE TRANSITION CABLE. THIS INCLUDES: V.35, RS-232, RS-449, RS-530, RS-530A IN MALE AND FEMALE VERSIONS FOR BOTH DCE AND DTE DEVICES. THIS FEATURE PROVIDES EASY CONFIGURATION AND RE-CONFIGURATION AS NETWORK REQUIREMENTS CHANGE WITHOUT THE NEED OF PURCHASING A DIFFERENT SERIAL INTERFACE CARD. TWO CABLES ARE REQUIRED TO SUPPORT THE TWO PORTS ON THE WIC. SPECIFICATIONS PRODUCT DESCRIPTION : CISCO EXPANSION MODULE - 2 PORTS DEVICE TYPE : EXPANSION MODULE FORM FACTOR : PLUG-IN MODULE PORTS QTY : 2 PORTS CABLING TYPE : SERIAL DATA LINK PROTOCOL : SERIAL DATA TRANSFER RATE : 2 MBPS NETWORKING CONNECTIVITY TECHNOLOGY : WIRED CABLING TYPE : SERIAL DATA LINK PROTOCOL : SERIAL DATA TRANSFER RATE : 2 MBPS STATUS INDICATORS : LINK ACTIVITY EXPANSION / CONNECTIVITY PROVIDED INTERFACES : 2 X SERIAL - ASYNCHRONOUS/SYNCHRONOUS: 2 COMPATIBLE SLOTS : 1 CONDITION : REFURBISHED. AVAILABILITY : IN STOCK. WARRANTY : 30 DAYS


	Manufacturer