Detail overview
BROADCOM BCM957504-N1100G Single-port 100 Gb/s Qsfp56 Ethernet Pci Express 4.0 X16 Ocp 3.0 Sff Network Adapter.
Overview The BROADCOM® BCM957504-N1100G Is A Single-port 100 Gb/s Pci Express 4.0 X16 Network Adapter Designed To The Open Compute Project (ocp) 3.0 Design Specification In Small Form Factor With One Qsfp56 Network Connector. The Adapter Supports Qsfp56/qsfp28/qsfp+ Optical Modules And Copper Direct-attach Cables. The Network Adapter Uses The BROADCOM Bcm57504 100gbe Mac Controller With An Integrated Single-channel 100gbe Sfi Transceiver.
Features
• Single-port Pluggable Media Interface, Which Is Compatible With A Qsfp56/qsfp28/qsfp+ Optical Transceiver Or A Copper Direct-attach Cable.
• Industry’s Most Secure Pcie Adapter Solution Leveraging BROADCOM’S Broadsafe® Technology
• Supports 50g Pam-4 And 25g Nrz Signaling.
• Multi-host Up To Four Hosts.
• Fully Compliant With The Sff-8402 Standard.
• X16 Pci Express 4.0 Compliant.
• Sr-iov With Up To 1k Virtual Functions (vfs).
• Function-level Reset (flr) Support.
• Truflow™ Flow Processing Engine.
• Virtual Network Termination – Vxlan, Nvgre, Geneve, Gre Encap/decap.
• Vswitch Acceleration.
• Tunnel-aware Stateless Offloads.
• Dcb Support – Pfc, Ets, Qcn, Dcbx.
• Rdma Over Converged Ethernet (roce)
• Network Controller Sideband Interface (nc-si).
• Smbus 2.0.
• Mctp Over Smbus.
• Jumbo Frames Up To 9 Kb.
• Advanced Congestion Avoidance.
• Multiqueue, Netqueue, And Vmq.
• Ipv4 And Ipv6 Offloads.
• Tcp, Udp, And Ip Checksum Offloads.
• Large Send Offload (lso).
• Large Receive Offload (lro).
• Tcp Segmentation Offload (tso).
• Receive-side Scaling (rss).
• Transmit-side Scaling (tss).
• Vlan Insertion/removal.
• Interrupt Coalescing.
• Network Boot—pxe, Uefi.
• Iscsi Boot.
• Wake-on-lan (wol).
• Msi And Msi-x.
• Ocp 3.0 Fru Support.
• Conforms To The Ocp 3.0 Design Specification Version 1.00
Applications Single-port 100-gigabit Ethernet Adapter For Ocp Systems.
Condition : New Factory Sealed
Availability : In Stock.
Our Warranty : 30 Days.